new product u(f,b)8bt thru u(f,b)8dt vishay general semiconductor document number: 89086 revision: 13-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 ultrafast rectifier features ? oxide planar chip junction ? ultrafast recovery time ? low switching losses, high efficiency ? high forward surge capability ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 260 c, 40 s (for to-220ac and ito-220ac package) ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer computer, automotive and telecommunicatio n applications. mechanical data case: to-220ac, ito-220ac, to-263ab epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 8.0 a v rrm 100 v to 200 v i fsm 100 a t rr 20 ns v f at i f = 8 a 0.79 v t j max. 150 c case pin 2 pin 1 to-220ac u8xt ito-220ac uf8xt ub8xt pin 1 pin 2 k heatsink 1 2 1 2 k pin 2 pin 1 to-263ab 1 2 maximum ratings (t c = 25 c unless otherwise noted) parameter symbol u8bt u8ct u8dt unit maximum repetitive peak reverse voltage v rrm 100 150 200 v maximum average forward rectified current (fig. 1) v f(av) 8.0 v peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 100 a isolation voltage (ito-220ac only) from terminals to heatsink t = 1 min v ac 1500 v operating junction and storage temperature range t j , t stg - 55 to + 150 c
new product u(f,b)8bt thru u(f,b)8dt vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89086 revision: 13-may-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms electrical characteristics (t c = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage (1) i f = 5 a i f = 8 a i f = 20 a t a = 25 c v f 0.90 0.96 1.12 - 1.02 - v i f = 5 a i f = 8 a i f = 20 a t a = 150 c 0.72 0.79 0.99 - 0.86 - reverse current (2) rated v r t a = 25 c t a = 100 c i r - 200 10 500 a ma reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 15 20 ns reverse recovery time i f = 1.0 a, di/dt = 100 a/s, v r = 30 v, i rr = 0.1 i rm t rr 19 - ns storage charge q rr 7.1 - nc reverse recovery time i f = 8 a, di/dt = 50 a/s, v r = 30 v, i rr = 0.1 i rm t rr 23 - ns storage charge q rr 6.5 - nc typical junction capacitance 4.0 v, 1 mhz c j 25 - pf thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol u8xt uf8xt ub8xt unit typical thermal resistance from junction to case r jc 4.0 5.0 4.0 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ac u8dt-e3/4w 1.83 4w 50/tube tube ito-220ac uf8dt-e3/4w 1.69 4w 50/tube tube to-263ab ub8dt-e3/4w 1.37 4w 50/tube tube to-263ab ub8dt-e3/8w 1.37 8w 800/reel tape and reel
new product u(f,b)8bt thru u(f,b)8dt vishay general semiconductor document number: 89086 revision: 13-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. maximum forward current derating curve figure 2. forward power loss characteristics figure 3. typical instantaneous forward charateristics 0 6 8 10 12 75 50 25 0 100 125 150 175 a v erage for w ard rectified c u rrent (a) am b ient temperat u re (c) 4 2 resisti v eorind u cti v e load u 8 & ub 8 uf 8 0 1 2 3 4 5 6 7 8 9 0246 910 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 d = t p /t t p t 1357 8 10 1 0.1 0.1 0.3 0.5 0.7 0.9 t a = 150 c t a = 125 c t a = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 0.2 0.4 0.6 0. 8 0.01 t a = 100 c figure 4. typical reverse leakage charateristics figure 5. typical junction capacitance t a = 150 c t a = 125 c t a = 25 c 10 000 1000 100 10 10 20 30 40 50 60 70 8 0 90 100 1 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent ( a) 0.1 t a = 100 c re v erse v oltage ( v ) j u nction capacitance (pf) 0.1 10 1 100 100 10 1 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p
new product u(f,b)8bt thru u(f,b)8dt vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89086 revision: 13-may-08 4 package outline dimensions in inches (millimeters) to-220ac case pi n 2 pi n 1 0.635 (16.13) 0.625 (15. 8 7) 0.415 (10.54) max. 0.154 (3.91) dia. 0.14 8 (3.74) dia. 0.113 (2. 8 7) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) pi n 12 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.6 8 ) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.14 8 (29.16) 1.11 8 (2 8 .40) 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.145 (3.6 8 ) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.1 8 5 (4.70) 0.175 (4.44) ito-220ac pi n 1 2 0.025 (0.64) 0.015 (0.3 8 ) 0.404 (10.26) 0.3 8 4 (9.75) 0.076 (1.93) ref. 0.076 (1.93) ref. 45 ref. 0.600 (15.24) 0.5 8 0 (14.73) 0.560 (14.22) 0.530 (13.46) 0.035 (0. 8 9) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.191 (4. 8 5) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.671 (17.04) 0.651 (16.54) 0.02 8 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 7 ref. 7 ref. 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.140 (3.56) dia. 0.125 (3.17) dia. 0.135 (3.43) dia. 0.122 (3.0 8 ) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4. 8 3) 0.170 (4.32) to-263ab mo u nting pad layo u t 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.0 8 (2.032) mi n . 0.15 (3. 8 1) mi n . 0.33 ( 8 .3 8 ) mi n . 0.42 (10.66) mi n . 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4. 8 3) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15. 8 5) 0.591 (15.00) 0.037 (0.940) 0.027 (0.6 8 6) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 ( 8 .13) 0.411 (10.45) 0.3 8 0 (9.65) 0.245 (6.22) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
